Take Your Mesh Network on the Road!
Ready to build a mobile Meshtastic or Meshcore node? This digital download provides the STL files needed to print a heavy-duty vehicle mount for securing a Harbor Breeze Solar Node directly to your car, truck, or SUV roof. Designed with a wide stance, vibration dampening, and four magnetic anchor points, it creates a stable mobile platform for off-grid communications.
File Details & Printing Recommendations:
Built for the Elements (Main Body): For the main mount body, it is highly recommended to print in ASA with 5 walls and 10mm Brim. This ensures maximum strength, UV resistance, and prevents the mount from degrading or deforming in direct sunlight.
TPU Contact Points & Vibration Dampening: The download includes separate STL files for the front bumper and rear spoiler rest to make slicer setup easier. Print these components in 95A TPU to provide a softer resting point against the vehicle and to cushion the solar panel against road vibrations. Increase walls to 6 to print solid with no infill.
Quad-Magnet Base: The base design features four dedicated pockets perfectly sized for heavy-duty 30 lb pull-force magnets, giving the node massive gripping power and a stable footprint at high speeds.
Choose Your Setup: Both N-Type and SMA antenna mount versions are included in the download to fit your specific build requirements.
Licensing & Terms:
This digital download is strictly for personal, non-commercial use. You may not sell physical prints of this design, distribute the digital files, or modify them for commercial purposes.
Hardware Notice:
This listing is for digital 3D-printable STL files only. No physical parts are included. You will need to supply your own 3D printer filament, LoRa board, board mounting sled, antenna, and antenna hardware.
Disclaimer:
The use of this printed design is strictly at your own risk. While the TPU bumper provides a soft contact point, we cannot guarantee that long-term use, trapped dirt, or friction will not cause damage, scratching, or wear to your vehicle's paint, clear coat or body. Ensure your surface is clean before mounting.
Note:
All digital sales are final. Refunds are not available.
Links & Resources
My build videos are available at: https://www.youtube.com/@HacnCrap
Harbor Breeze Solar Light: https://www.lowes.com/pd/Harbor-Breeze-60-Lumens-1-Watt-Black-Warm-White-Solar-LED-Spot-light/5018244381
Take Your Mesh Network on the Road!
Ready to build a mobile Meshtastic or Meshcore node? This digital download provides the STL files needed to print a heavy-duty vehicle mount for securing a Harbor Breeze Solar Node directly to your car, truck, or SUV roof. Designed with a wide stance, vibration dampening, and four magnetic anchor points, it creates a stable mobile platform for off-grid communications.
File Details & Printing Recommendations:
Built for the Elements (Main Body): For the main mount body, it is highly recommended to print in ASA with 5 walls and 10mm Brim. This ensures maximum strength, UV resistance, and prevents the mount from degrading or deforming in direct sunlight.
TPU Contact Points & Vibration Dampening: The download includes separate STL files for the front bumper and rear spoiler rest to make slicer setup easier. Print these components in 95A TPU to provide a softer resting point against the vehicle and to cushion the solar panel against road vibrations. Increase walls to 6 to print solid with no infill.
Quad-Magnet Base: The base design features four dedicated pockets perfectly sized for heavy-duty 30 lb pull-force magnets, giving the node massive gripping power and a stable footprint at high speeds.
Choose Your Setup: Both N-Type and SMA antenna mount versions are included in the download to fit your specific build requirements.
Licensing & Terms:
This digital download is strictly for personal, non-commercial use. You may not sell physical prints of this design, distribute the digital files, or modify them for commercial purposes.
Hardware Notice:
This listing is for digital 3D-printable STL files only. No physical parts are included. You will need to supply your own 3D printer filament, LoRa board, board mounting sled, antenna, and antenna hardware.
Disclaimer:
The use of this printed design is strictly at your own risk. While the TPU bumper provides a soft contact point, we cannot guarantee that long-term use, trapped dirt, or friction will not cause damage, scratching, or wear to your vehicle's paint, clear coat or body. Ensure your surface is clean before mounting.
Note:
All digital sales are final. Refunds are not available.
Links & Resources
My build videos are available at: https://www.youtube.com/@HacnCrap
Harbor Breeze Solar Light: https://www.lowes.com/pd/Harbor-Breeze-60-Lumens-1-Watt-Black-Warm-White-Solar-LED-Spot-light/5018244381
