Vertical & Horizontal Mounting: Designed with integrated, contoured channels that accommodate standard pipe clamps (hose clamps) or heavy-duty zip ties, allowing you to easily secure the node in both vertical and horizontal orientations.
Enclosed Bulkhead Chamber: The redesigned ASA chassis fully covers and shields the antenna bulkhead and delicate pigtail connection, keeping them safe from physical damage and direct exposure.
Bottom Access Port & TPU Plug: The bottom opening allows you to easily push the antenna bulkhead up into place during assembly. Once installed, the custom flexible TPU plug caps the cavity, helping keep insects and debris out of the housing (note: not designed to be completely watertight).
Improved Signal Clearance: The antenna mounting point sits approximately 1 inch further away from the mounting surface compared to the V1 mount, giving the antenna breathing room to reduce near-field detuning and optimize your radiation pattern.
Built for the Elements: Printed exclusively in ASA, this mount won't degrade or deform in direct sunlight, guaranteeing superior strength and UV resistance.
Choose Your Setup: Select either an N-Type or SMA antenna mount to fit your specific build requirements.
Hardware Notice: This listing is for the 3D-printed V2 Pole/Rail Mount assembly (ASA body and TPU plug) only. You will need to supply your own pipe clamps/hose clamps or heavy-duty zip ties, LoRa board, board mounting sled, antenna, antenna hardware, and the Harbor Breeze solar unit. Important: Please do not overtighten your clamps or zip ties during installation. While the 3D-printed plastic is robust, excessive crushing force can cause damage to the mount.
Note: All sales are final. Refunds are not available. As with many functional 3D-printed parts, warping or surface artifacts may be present. Rest assured, all mounts are structurally sound and tested for reliable performance.
Links & Resources
My build videos are available at: https://www.youtube.com/@HacnCrap
Harbor Breeze Solar Light: https://www.lowes.com/pd/Harbor-Breeze-60-Lumens-1-Watt-Black-Warm-White-Solar-LED-Spot-light/5018244381
As an Amazon Associate, I earn from qualifying purchases.
Pipe Clamps https://amzn.to/44MyBIV
Heltec T096 Board - https://amzn.to/3RwTRza
6" N-Type Bulkhead/Pigtail - https://amzn.to/4bFBazY
Alfa 915Mhz Outdoor Antenna https://amzn.to/3SYelBq
6” SMA Bulkhead/Pigtail - https://amzn.to/4z0PmO9
Muzi Works 915Mhz Whip SMA Antenna - https://amzn.to/4ctjvvP
Vertical & Horizontal Mounting: Designed with integrated, contoured channels that accommodate standard pipe clamps (hose clamps) or heavy-duty zip ties, allowing you to easily secure the node in both vertical and horizontal orientations.
Enclosed Bulkhead Chamber: The redesigned ASA chassis fully covers and shields the antenna bulkhead and delicate pigtail connection, keeping them safe from physical damage and direct exposure.
Bottom Access Port & TPU Plug: The bottom opening allows you to easily push the antenna bulkhead up into place during assembly. Once installed, the custom flexible TPU plug caps the cavity, helping keep insects and debris out of the housing (note: not designed to be completely watertight).
Improved Signal Clearance: The antenna mounting point sits approximately 1 inch further away from the mounting surface compared to the V1 mount, giving the antenna breathing room to reduce near-field detuning and optimize your radiation pattern.
Built for the Elements: Printed exclusively in ASA, this mount won't degrade or deform in direct sunlight, guaranteeing superior strength and UV resistance.
Choose Your Setup: Select either an N-Type or SMA antenna mount to fit your specific build requirements.
Hardware Notice: This listing is for the 3D-printed V2 Pole/Rail Mount assembly (ASA body and TPU plug) only. You will need to supply your own pipe clamps/hose clamps or heavy-duty zip ties, LoRa board, board mounting sled, antenna, antenna hardware, and the Harbor Breeze solar unit. Important: Please do not overtighten your clamps or zip ties during installation. While the 3D-printed plastic is robust, excessive crushing force can cause damage to the mount.
Note: All sales are final. Refunds are not available. As with many functional 3D-printed parts, warping or surface artifacts may be present. Rest assured, all mounts are structurally sound and tested for reliable performance.
Links & Resources
My build videos are available at: https://www.youtube.com/@HacnCrap
Harbor Breeze Solar Light: https://www.lowes.com/pd/Harbor-Breeze-60-Lumens-1-Watt-Black-Warm-White-Solar-LED-Spot-light/5018244381
As an Amazon Associate, I earn from qualifying purchases.
Pipe Clamps https://amzn.to/44MyBIV
Heltec T096 Board - https://amzn.to/3RwTRza
6" N-Type Bulkhead/Pigtail - https://amzn.to/4bFBazY
Alfa 915Mhz Outdoor Antenna https://amzn.to/3SYelBq
6” SMA Bulkhead/Pigtail - https://amzn.to/4z0PmO9
Muzi Works 915Mhz Whip SMA Antenna - https://amzn.to/4ctjvvP
